• Low pressure loss(1/2 of conventional)
• High dust collection efficiency for desalt
• Long life(2 times better than conventional)
• Minimized the increase of pressure loss even in dissolved salt components
• High dust arrestance efficiency
• Good durability

This filter allows perfectly filtration from 0.1µm having thecharacter of low pressure loss, and it is named ULPA Filter.

---

Test Method	Result
0.12µm-0.17µm (Particle Counter)	99.999% over
Leak Test	Passed

Perfect-Cel 1 is used for filtration of filterelement of 0.3µm, and its efficiency is more than 99.97%. And also, follwing is the test results obtained by various method of the leakage test performance.

---

Classification	Leak Test	0.3umHOT.DOP Test
SCAN Tested	Passed	99.99% over
Standard	-	99.99% over

HEPA filter is used for filtration of filterelement of 0.3µm in the air conditioning system, and it is advisable to apply HEPA filter for your application at high flow rate and narrow places under the static pressure of 25.4mmAq.

---

Classification	Leak Test	0.3umHOT.DOP Test
SCAN Tested	Passed	99.99% over
Standard	-	99.97% over

This HEPA filter is used for filtration of filterelement of 0.3µm in the film manufacturing system, medicine manufacturing system, semi-conductor manufacturing system and clean oven for medicines at maximum 250°C.

---

Classification	H6M-GAS	H6H-SAS
Media	Woven Glass	Woven Glass
Separator	Aluminium	Aluminium
Sealer	Silicon	Ceramic

Three kinds of dust arrestance efficiency of 65%, 85% or 95% may be adopted depending on filtering materials. Filtering area may be enlarged in double to reduce pressure loss by half and increase air flow capacity in double. The filter may be applied even at high temperature

USAGE

Separate filter and frame,
Easy to waste treatment,
Low replacement cost,
Lost cost by Semi-permanent frame

ULPA filter is made of thin element having 50mm depth and it is advisable to apply ULPA filter to manufacture a wide variety of th cleaning equipment for your application, because of its light weight.

---

Test Method	Result
0.12µm-0.17µm (Particle Counter)	99.999% over
Leak Tested	Passed
Velocity	0.35m/sec

ULPA filter is made of thin element having 50mm depth and it is advisable to apply ULPA filter to manufacture a wide variety of the cleaning equipment for your application, because of its low pressure loss.

---

Test Method	Result
0.12µm-0.17µm (Particle Counter)	99.999% over
Leak Test	Passed
Velocity	0.35m/sec

• High dust collection efficiency and low pressure loss.
• Suitable collection efficiency depending on each usage, size adjustment, Air flow rate selection.
• High dust holding capacity. Long life time.
• Easy to manage and install due to its light weight.

• For HEPA pre-treatment use
• Painting booth
• General air conditioner and building air conditioner

Installing by holding frame
Filtering area larger than flat shape
Using as a 1st or 2nd filter according to filtering materials

PANEL FILTER
FEATURE

It is inevitable that human need clean areas in every industries, which provides customers with satisfied work conditions, building maintenance & managing law and also with good care of ourselves as well. Now it is the situation that we require the highest filtration system, such as, building air conditioning and air filter, getting rid of cigarette smoke and other micro particles effectively. We, thus, CTC Industrial Co., Ltd. are pleased to introduce our new product, "ELITOLON" the highest technology of air filter with ultra minute fiber of poly fiber, keeping static charge without loss permanently.